gezocht graupner 700 BB turbo motoren
Moderator: Moderators
gezocht graupner 700 BB turbo motoren
Gezien de levering momenteel niet mogelijk is vraag ik jullie of er nog ergens graupner speed 700 BB turbo motoren (bestelnummer 6317)rondslingeren die ik zou mogen overnemen. Of wellicht weten jullie er nog een paar te koop bij een plaatselijke modelbouwwinkel.
Alvast dank!
Alvast dank!
Hoe dan?
- leo-rcc
- Site Admin
- Posts: 5882
- Joined: Thu Aug 21, 2003 9:55 pm
- Location: Hoogvliet-Rotterdam
- Contact:
De 6317 is de 12V versie, de 3308 is de 9,6V versie.
Mvg,
Leo van Miert
Team RCC website.
Gentlemen, no fighting please. This is, after all, a council of war.
Leo van Miert
Team RCC website.
Gentlemen, no fighting please. This is, after all, a council of war.
This cheap 200W motor is worth to take a look on:
http://www.pollin.de
type the following in the search field:
JOHNSON 1607022506
article number is 320389
4,95 Euro
http://www.pollin.de
type the following in the search field:
JOHNSON 1607022506
article number is 320389
4,95 Euro
www.wettkampfroboter.de
- leo-rcc
- Site Admin
- Posts: 5882
- Joined: Thu Aug 21, 2003 9:55 pm
- Location: Hoogvliet-Rotterdam
- Contact:
They are indeed interesting, specially for that price.
Mvg,
Leo van Miert
Team RCC website.
Gentlemen, no fighting please. This is, after all, a council of war.
Leo van Miert
Team RCC website.
Gentlemen, no fighting please. This is, after all, a council of war.
Even taking in the extra gearing to get an acceptable speed with a normal wheelsize, it's a cheap motor.
The Torque is especialy good. Even higher than that from the Speed 900, what has 1.1nm on 12V.
On the other hand, that means stall takes a lot more amps than 21A.
I guess 21A can be seen as the useable power for the drive.
I would say. 100mm wheel, 2 stage gearing with a total gearratio 19-1.
Hey, that sounds as Prodigy Evo with the speed 700 Turbo C.
The Torque is especialy good. Even higher than that from the Speed 900, what has 1.1nm on 12V.
On the other hand, that means stall takes a lot more amps than 21A.
I guess 21A can be seen as the useable power for the drive.
I would say. 100mm wheel, 2 stage gearing with a total gearratio 19-1.
Hey, that sounds as Prodigy Evo with the speed 700 Turbo C.
Beter nu creperen, dan in de wars repareren.
i dont have enough knowledge to know if these motors are suitable for featherweights. does anyone know the weight? also 120A on stall is quite a high number indeed. wouldnt wanna blow up my speedos..
however im willing to experiment with these.. anyone else want in.. i think, the shipping cost will be lower when we get them all shipped to holland in one box .
however im willing to experiment with these.. anyone else want in.. i think, the shipping cost will be lower when we get them all shipped to holland in one box .
[img]http://www.esnips.com/images/emoticons/medal.gif[/img]Competitor 2nd Dutch Robotwars.
Bots:
Amok---Malice---Havoc
Bots:
Amok---Malice---Havoc
- leo-rcc
- Site Admin
- Posts: 5882
- Joined: Thu Aug 21, 2003 9:55 pm
- Location: Hoogvliet-Rotterdam
- Contact:
There is nothing to experiment, we know they work. As long as you gear them down properly the amps stay down as well.
Mvg,
Leo van Miert
Team RCC website.
Gentlemen, no fighting please. This is, after all, a council of war.
Leo van Miert
Team RCC website.
Gentlemen, no fighting please. This is, after all, a council of war.
Who is online
Users browsing this forum: No registered users and 34 guests